- This is an electric ball grip driver equipped with a lithium-ion battery and motor.
- Quick tightening is done by an electric motor, while final tightening can be done with the same feel as a manual screwdriver.
- It comes with a slide switch that allows you to operate forward and reverse with light force.
- It has a built-in high-brightness LED light that is useful even in dark locations.
- High speed rotation improves work efficiency.
- This is an aluminum sleeve chuck that can be used with double-headed and single-headed bits.
- Charging is easy via the USB port.
- It also has a delay feature that keeps it lit for 5 seconds after use.
- For electrical and facility construction, panel assembly, equipment and device maintenance, automobile and motorcycle maintenance, DIY, etc.
Specifications in detail
Durability torque (manual): 10N･m
Applicable bits: 6.35mm across (single-head and double-head bits)
Battery capacity: Li-Ion 3.6V 800mAh
Charging time: Approx. 60 minutes
Number of charging times: Approximately 500 times
Continuous use time: Approximately 40 minutes (unloaded)
Number of times the screws are tightened: Approximately 200 times (M4 x 20 mm)
Charging method: USB charging (Micro USB-type B)
Sleeve: 6.35mm across, aluminum sleeve chuck
Maximum tightening torque (N・m): 2 (electric)
Body dimensions (mm): 140
No-load speed (min(-1)): 280
Voltage(V):3.6
Rated current(A): 0.8
Chuck capacity (mm): 6.35
Total length (mm): 140
Handle diameter (mm): 45
Shaft length (mm): 100
Blade tip: (+) 2
VESSEL 220USB-1
