Features
- This induction heater can efficiently heat bearings and parts of various sizes.
- Temperature rise is controlled by highly precise current control.
- With two output settings (50%/100%), small bearings can be heated safely and with low power consumption.
- All heaters are equipped with a heating time mode.
- Overheat protection reduces the risk of damage to the induction coil and electronic devices, increasing reliability and safety.
- The automatic demagnetization function reduces the risk of iron powder contamination after heating.
Purpose
- For heating bearings up to 700 kg.
Specifications in detail
Standard sliding yoke for ergonomic operation
Designed to heat bearings in either horizontal (around the coil) or vertical (around the sliding yoke) position
Automatic temperature or time limit for safe and easy use
Automatic demagnetization reduces the risk of bearing contamination
Automatic warming function keeps bearings at temperature after the heating cycle
Designed for easy transport with a forklift
Suitable bearing inner diameter (mm): 115-700 (optional yoke for 60mm and up or 80mm and up)
Time mode (min): 0-120
Working space (mm): 300x320
Coil diameter (mm): 150
Power supply (V): 400-460 (50/60Hz)
Width (mm): 400
Depth (mm): 743
Height (mm): 550
Temperature range (℃): 0-250
Rated current (A): 32.6-37.5
Maximum bearing weight (kg): 700
SKF TIH L33/MV
