Features
- Ideal for compact piping.
- It is also possible to drain water.
- Cut marks, which are convenient when cutting the tube, are displayed approximately every 500 mm.
Note
- We recommend using an insert ring. (If you need to ensure the pull-out strength of the JIS standard, please use an insert ring (JISB 8381-1).)
- Do not apply loads such as tension, twisting, or extreme bending to the tube, as this may cause the tube to collapse, burst, or come loose.
- The tube's bursting pressure decreases as the temperature rises, so be sure to understand the operating pressure and ensure that you have a sufficient safety margin.
- Use the tube with a minimum bending radius or greater.
- When attaching a tube to a one-touch fitting, please check that the cut area of the tube is cut at a right angle, that there are no scratches on the outer diameter of the tube, and that the tube is not oval.
Specifications in detail
Maximum operating pressure: 0.6MPa (at 20℃ 65%RH)
Vacuum pressure: -100kPa
Operating temperature range: -15 to 60℃ (no freezing)
Color: Clear yellow
Outer diameter (mm): 6
Inner diameter (mm): 4
Minimum bending radius (mm): 13
Total length (m): 100
Operating temperature range (℃): -15 to 60 (no freezing)
Fluid used: Air, water (conditions apply)
Tube outer diameter (φD) (mm): φ6
Tube inner diameter (φD) (mm): φ4
Minimum mounting radius (mm): 21
Tube color: Clear yellow
PISCO UC0640-100-CY
